Message "change oil" - reser

Tips and cheat
Benutzeravatar

Topic author
Martin_CZ
Beiträge: 49
Registriert: Dienstag 30. Januar 2007, 18:33
Wohnort: Czech Rep
Kontaktdaten:

Message "change oil" - reser

Beitrag von Martin_CZ »

Hello,
the time has come to change the oil in my Bulldog. A Yamaha service made the operation and they told me that there is an "oil-counter" installed which can only be reset when it is on. But - at the time when my Bulldog was in service, it was not on yet.

Today when I drove, I received message on the display "CHnGE OIL"..... But it's already been changed.

Is it possible to reset the counter by myself, or shall I go to service again? Thanks for tips.

Martin

Mick P
Beiträge: 116
Registriert: Montag 20. September 2004, 20:13
Wohnort: Rochester, Kent. UK

Beitrag von Mick P »

Hi Martin

If your Dog is 2001-2004 hold down both buttons (odometer SET/RESET) on your instrument console as you switch on the ignition, this should reset it.

Mick P
Benutzeravatar

Axman
Moderator
Beiträge: 4100
Registriert: Mittwoch 5. Februar 2003, 13:00
Vorname: Axel
Wohnort: 58708 Menden
Alter: 79

Beitrag von Axman »

Good morning,

sorry Mick. but what you described resets the clock.. :shock: :wink:

To reset "change oil" you do the following : turn the ignition-key to "off" then press the reset-button (the lower one)... keeping the button depressed turn the ignition to "on" and voila´...no more "change oil" :-D

greets

Axman

Mick P
Beiträge: 116
Registriert: Montag 20. September 2004, 20:13
Wohnort: Rochester, Kent. UK

Beitrag von Mick P »

Yes Sorry about that miss read the instructions :?
Not only do i have trouble reading german but i am also having trouble with my english #-o

Regards Mick
Benutzeravatar

Topic author
Martin_CZ
Beiträge: 49
Registriert: Dienstag 30. Januar 2007, 18:33
Wohnort: Czech Rep
Kontaktdaten:

Beitrag von Martin_CZ »

Mick & Axman - thanks a lot! I have tried all possible "CTRL-ALT-DEL" on the set/reset buttons, I've erased clock, km-counters but the message was still there :)

So thanks for the advice. By the way, where did you find it? It is not in the 350-page service manual. Perhaps in the user manual which I have for the bike?

Martin

Mick P
Beiträge: 116
Registriert: Montag 20. September 2004, 20:13
Wohnort: Rochester, Kent. UK

Beitrag von Mick P »

Hi Martin

Owners manual 5JN-F8199-A0

English section

Instruments and control functions (section 3)

page 3-4 3-5

Hope this helps
Antworten